10,463+ books brought to market
HMD PublishingHMD Publishing
Named client reviews
Book Design

Best Font for a Book: Which Font and Size to Use (Print and Kindle)

The best font for a book is a classic serif such as Garamond, Caslon or Palatino at 10.5 to 12pt. Which fonts and sizes to use for print and Kindle, the ones to avoid, and how to check your font will pass KDP.

Portrait of Aeysha Mahmood, Creative Director at HMD Publishing

Aeysha Mahmood

16 November 20269 min read
Share:
Best Font for a Book: Which Font and Size to Use (Print and Kindle)

The best font for a book is a classic serif typeface such as Garamond, Caslon, Baskerville, Palatino or Minion, set at 10.5 to 12 point for print. Most novels sit at about 11pt with roughly 14pt line spacing. Use one plain serif for the body text, keep anything fancier for chapter titles, and check the font is licensed and embeds in your PDF. Kindle is different: readers choose their own font and size there, so you don't set the body font size at all.

Key takeaways#

  • For a printed book, pick a classic serif for the body text: Garamond, Caslon, Baskerville, Palatino or Minion are safe choices.
  • Set body text between 10.5pt and 12pt, with line spacing about 1.2 to 1.4 times the font size. 11pt on 14pt is a good starting point for a novel.
  • Point size isn't the whole story. Some fonts look much bigger than others at the same size, so print a test page before you decide.
  • KDP needs a font size of at least 7pt and every font embedded in your PDF (as of November 2026). Fonts that won't embed get your file rejected.
  • For Kindle, leave the body text on defaults. Readers pick their own font and size, and KDP asks you not to force them.

What font are most books written in?#

Pick up any novel on your shelf and the body text is almost certainly a serif font. Serifs are the small strokes at the ends of letters. Over long stretches of text they help letters sit in a steady line and give each word a recognisable shape, which is why publishers have set books in them for centuries.

The names you'll see most often on the copyright pages of traditionally published books are Garamond, Caslon, Baskerville, Sabon, Minion, Palatino and Bembo. You don't need to know their history. What matters is that they're quiet. A good book font disappears, and the reader only notices the story.

Amazon's own advice says much the same. KDP's paperback font guide suggests Centaur, Garamond, Hightower Text and Palatino Linotype for body text, and warns that "more elaborate fonts" belong in headings, not paragraphs.

The best fonts for a printed book#

Here are five dependable body fonts, what each one feels like on the page, and a free alternative if you don't want to buy a licence.

Five classic book fonts compared

Garamond
Caslon
Baskerville
Palatino
Minion
FeelWarm, elegant, timelessSturdy, traditional, a little old-worldCrisp, formal, high contrastOpen, friendly, easy on the eyeClean, modern classic, very even
Good forLiterary fiction, general novels, memoirHistorical fiction, essays, classicsNon-fiction, memoir, serious fictionNon-fiction, self-help, older readersAlmost anything, fiction or non-fiction
Space on the pageCompact: fits plenty of wordsMediumMedium to wideWide: adds pagesCompact to medium
Free optionEB Garamond (Google Fonts)Libre Caslon Text (Google Fonts)Libre Baskerville (Google Fonts)Palatino Linotype comes with WindowsCrimson Pro (Google Fonts) has a similar feel
Scroll to see all columns

If you're stuck, start with Garamond for fiction and Palatino or Minion for non-fiction. You won't go wrong with either.

What about Times New Roman, Arial and Calibri?

Times New Roman was designed for a newspaper, with narrow columns in mind. It works, and KDP lists it as a popular choice, but on a book page it looks cramped and a bit like a school essay. Readers can't always say why a book feels homemade. The font is often part of it.

Arial and Calibri are sans-serif fonts, made for screens and office documents. They're fine for a heading, a sidebar or a workbook's instructions. For page after page of a novel, a serif reads more comfortably.

Georgia sits in between. It was drawn for screens, so it's a reasonable choice if you want one font that looks decent in print and in a PDF.

Fonts to avoid for body text

  • Decorative and script fonts. Lovely on a cover, tiring after a paragraph.
  • Very thin or light weights. They can print faint and grey. Amazon also asks you to avoid thin fonts in eBooks because they're harder to read.
  • Free fonts of unknown origin. KDP warns that some downloaded fonts are incomplete, badly drawn or won't embed in a PDF at all. A font with no proper italic is a common trap.
  • Comic Sans and novelty fonts. Unless it's a deliberate choice for a young children's book, leave them out.

What font size should a book be?#

For most printed books, 11pt to 12pt is right for body text. Smaller trims and fonts that look big for their size can go down to 10.5pt. Here's a starting point by book type.

Starting font sizes for print books

Body text size
Line spacing (leading)
Novel, 5 x 8 in (about A5)10.5 to 11pt13.5 to 14pt
Novel, 6 x 9 in11 to 12pt14 to 15pt
Non-fiction and self-help11 to 12pt14 to 16pt
Poetry11 to 12pt14 to 16pt
Large print editionMuch bigger: a separate editionAbout 1.3 times the size
Kindle eBookDon't set it: reader choosesDefault line height
Scroll to see all columns

Why 11pt in one font isn't 11pt in another

This catches out a lot of authors. Font size measures an invisible box, not the letters inside it. Garamond has small lower-case letters, so 11pt Garamond looks small. Georgia and Palatino have tall lower-case letters, so 11pt in those looks a size bigger.

That's why you should never pick a size from a list and stop there. Set a full page, print it at the real trim size and read it at arm's length. If you find yourself squinting, go up half a point. If the lines feel chunky and the book is getting long, come down half a point.

Line spacing matters as much as size

Line spacing, which typesetters call leading, is the gap from one line of text to the next. Too tight and the lines blur together. Too loose and the page looks gappy. A good rule is 120% to 140% of the font size, so 11pt text sits well on 13.5 to 15pt leading. In Word, set line spacing to "Exactly" and type the figure in, rather than using "Single" or "1.15", so every page lines up.

Font size changes your page count and your print cost

Every half point adds pages. On a 90,000-word novel, going from 11pt to 12pt can add dozens of pages, and print-on-demand printing is charged by page count. More pages also means a wider spine, so settle the font before your cover designer sets the spine width. Our free print cost calculator shows what extra pages do to the price.

KDP even offers a font for this: Amazon Endure, which it says is designed to reduce page count and save on printing costs. Constantia and Cambria are other space-saving options it mentions. Just print a test page first, because saving pages is no use if the book is harder to read.

Fonts for chapter titles and headings#

This is where you can have some fun. A chapter heading can use a second font that suits your genre: a bold sans-serif for a thriller, a soft script for a romance, small capitals in your body font for literary fiction.

Keep to two font families in the whole interior: one for the body text and one for headings. More than that and the book starts to look like a ransom note. Many professional interiors use just one family and get variety from size, small caps and italics. It also helps to echo the cover. If your title on the cover is in a particular display font, using it for chapter numbers ties the book together. Our guide to interior book design shows how headings, drop caps and scene breaks work together.

The best font for a Kindle book#

Here's the short answer: you don't really choose one. In a reflowable Kindle book, readers pick their own font and size on their device, and KDP's guidelines say body text must be "all defaults". That means no forced font, no fixed font size and default line height. If you force a font size, it overrides the reader's settings, and Amazon says readers report that as a poor reading experience.

You can embed fonts in an eBook, and Kindle lets readers switch publisher fonts on or off. But Amazon recommends sticking with the Kindle's own fonts unless your design really needs something else, because those have been tuned for its screens. If you do embed a font, you need a licence that covers eBook embedding, which is often a different licence from print.

Where you do have control is headings, chapter openings and special text like letters or text messages. Those can carry a style. Our Kindle formatting guide covers how to set that up in Word or Kindle Create.

Make sure your font passes KDP#

A lovely font is no use if KDP rejects the file. Here's what Amazon's paperback font page asks for, as of November 2026:

  • At least 7pt. That's the legal floor, not a recommendation. Body text should be well above it. It mostly matters for footnotes, captions and copyright pages.
  • Embed every font. When you export the PDF, every font must be embedded. To check, open the PDF in Adobe Acrobat, go to File, then Properties, then the Fonts tab. Every font listed should say "Embedded" or "Embedded Subset".
  • Embed in Word too. In Word, go to File, Options, Save and tick "Embed fonts in the file". KDP says to leave both boxes underneath it unticked.
  • No fake bold or italic. If a font has no real bold or italic version and Word fakes one, KDP can reject it as a "faux font". Choose a family with proper italic and bold styles.
  • Hold a licence. KDP is clear that you're responsible for licensing any font you use. Fonts that come with Windows, macOS or Microsoft Office are usually fine for print, and fonts under the SIL Open Font License (most of Google Fonts) are free for commercial books. Paid fonts from a foundry need the right licence for your use.

Formatting in Word? Our guide on how to format a book in Word covers styles, and KDP margins and gutter covers the page setup your font sits inside.

How do you choose the font for a book interior?

Portrait of Aeysha Mahmood, Creative Director at HMD Publishing
Aeysha Mahmood

Creative Director at HMD Publishing

Expert answer
I start with the reader, not the font list. Who is picking this book up, and how long will they read at a sitting? Then I set the same two pages in three fonts and print them at the real trim size. One always looks right for the genre and comfortable...

Aeysha Mahmood is available at HMD Publishing

Book a Free Consultation

A quick way to choose your font#

  1. 1Shortlist three serif fonts from the table above, or ones that come with your software.
  2. 2Set the same two pages in each, at your real trim size, at 11pt with 14pt line spacing. Use a page with dialogue and some italics.
  3. 3Print them and read them at arm's length, ideally in ordinary room light rather than at your desk.
  4. 4Adjust the size by half a point until the text feels comfortable, then check what it does to your page count.
  5. 5Check the italic and bold look like real styles, not slanted or smudged versions of the roman.
  6. 6Export a test PDF and confirm every font says Embedded before you format the whole book.

If you haven't picked your page size yet, do that first, because the font and the trim work together. Here's how to choose a book trim size.

When to hand it over#

Choosing a font is the easy bit. Setting it well across 300 pages, with even spacing, no stray widows and chapter openings that match, is where DIY interiors usually show. If you'd like to see your book set properly before you decide anything, we'll format your first chapter free. Our typesetters lay out every book by hand in Adobe InDesign, and you get a print-ready PDF and an eBook file. See book formatting.

A classic serif such as Garamond, Caslon, Baskerville, Palatino or Minion. For a novel, Garamond at 11pt is a safe start. For non-fiction, Palatino or Minion at 11 to 12pt reads comfortably. Print a test page before you commit.
Between 10.5pt and 12pt for body text in most printed books, with line spacing about 1.2 to 1.4 times the font size. KDP's minimum is 7pt, but that's only for small text such as footnotes. In a Kindle eBook, leave the size on default so readers can choose.
Yes. KDP accepts it and it embeds without trouble. It was designed for narrow newspaper columns, though, so on a book page it can look cramped. Garamond or Palatino usually looks more like a published book.
For headings, sidebars and workbook instructions, yes. For long body text in a novel or memoir, a serif font is more comfortable to read and looks more professional in print.
For the body text, none: leave it on default. Kindle readers choose their own font and size, and KDP asks for body text to use default settings. You can style headings and special text, and embed a font if you hold a licence that allows it.
Portrait of Aeysha Mahmood, Creative Director at HMD Publishing

Written by

Aeysha Mahmood

Creative Director

Aeysha Mahmood leads the creative vision at HMD Publishing, overseeing everything from book cover concepts to interior layout standards. With a sharp eye for design and a deep understanding of what sells in the publishing market, she ensures every project meets the highest visual and production standards. Aeysha manages the creative team and works closely with authors to translate their vision into professionally crafted books.

Meet Aeysha

Enjoyed this article?

Join thousands of authors getting publishing tips, KDP strategies, and industry insights in their inbox. No spam, unsubscribe anytime.

Verifying you’re human…

By subscribing, you agree to receive publishing emails from HMD. Unsubscribe anytime. See our privacy policy.

Continue Reading

Publishing support

Ready to Publish Your Book?

Get professional publishing services from the experts at HMD Publishing.